![]() Used provided frame to mount as a dashcam using a suction cup mount from another dashcam and used reversed (upside down) image setting. The Pro version comes packaged with the following accessories: Git1 action camera and following accessories: The Git1 came in a well packed box and the camera itself also was well protected in foam compartment.īuild quality looks very good and feels nice and solid.ĭimensions (WxHxD): 2.3" x 1.2" x 1.6" / 59.0 x 30.0 x 41.0 mm ![]() Rechargeable lithium-ion battery pack provides up to 90 minutes of 1080p recording Records to microSD/SDHC/SDXC cards up to 64GB Optional AV output cable for live video output Mini-USB port for data transfer, battery charging, and external microphone input (USB data cable included) Time-lapse mode (2 sec, 5 sec, 10 sec, 30 sec, 60 sec) Optional wrist-worn remote control available Has 900mAh battery that lasts for approx 120 minutes of recording.īuilt-in Wi-Fi for remote control and monitoring on iOS and Android devices. The display is 1.5" LCD screen in the back. This camera is based on Novatek chip and Sony Exmor IMX322 sensor. Plus there are much more optional accessories available at to purchase separately. PRO version comes with a lot of mounting accessories and waterproof case. There are two versions of the package, one standard and one PRO. It's available here at manufacturer's website: Impressive night video.Thank you for providing this camera for review. ![]() One of the best action cameras with the GoPro form factor. Then you can turn on the camera and switch to the setting mode to check the version of firmwareĪ video of the firmware update procedure is below:.After upgrade, remove the SD card and delete the firmware, otherwise it will upgrade again when you power on the camera next time.(The whole process lasts about 30 seconds) Connect the camera with USB charger to start the upgrade, then the photo status green light starts blinking(the light blinking slowly at the beginning, then blinking quickly), after the light stop blinking, it means upgrade is finished.Insert the SD card to the camera card slot.Download the firmware from the GitUp website.WE ARE NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DASH CAM AS A RESULT OF THESE INSTRUCTIONS. WARNING! MAKING CHANGES TO YOUR FIRMWARE ARE PERFORMED AT YOUR OWN RISK. Vendor support is quite good and initial reliability appears to be good. The GitUp Git1 a versatile camera that can be used as an action camera and a dashboard camera, the Git1 is a good choice. If used as a dash cam it is not the most discreet but it night time video quality pleasantly surprises given the Sony CMOS sensor. If you are looking for a GoPro style action camera, the GitUp Git1 is one of the best action cameras with this form factor. We would like to thank our members Tigris99, Sunny and Gibson99 for providing reviews on the Git1 in our forum. The manual didn’t mention what app to use so i searched and found FinalCam works so downloaded it and installed. You will need an app to connect to a WiFi access point and the FinalCam app for Android works with the Git1 To connect the Git1 to WiFi, press and hold the settings button for a couple of seconds until you hear a chime and shows WiFi on the screen. The Git1 also comes with WiFi capability. Size is not too large at 59 x 41 x 30 mm but the camera is still quite noticeable due to its rectangular form factor. This camera has a G-sensor and a 1.5″ LCD screen but does not have GPS. Like many action cameras the Git1 can be used as a dash cam since it has auto start / stop and loop recording. This combination performs quite well and the camera has a bitrate of 17Mbps. The camera is based on the Novatek 96655 processor and SONY IMX322 CMOS sensor. The night time quality is actually better than comparably priced action cameras. The Git1 has very good picture quality during the day and good picture quality at night. The Git1 is compatible with most GoPro accessories, mounts and attachments. This is the company’s first action / dash camera and it looks quite similar to the GoPro HERO3 cameras including button placement. The Git1 is a Chinese camera manufactured by a company called GitUp.
0 Comments
Leave a Reply. |